Hik-Connect app download link

Hikvision

https://www.apkmirror.com/apk/hikvision-inc/hik-connect/hik-connect-4-21-0-0122-release/

For Android Phone

https://www.apkmirror.com/apk/hikvision-inc/hik-connect/hik-connect-4-13-0-0205-release/hik- connect-4-13-0-0205-android-apk-download/         

[17/11, 5:01 pm] Sreejith Hikvision Technical Support Ekm: Put prefered dns 8.8.8.8 &alternate DNS 4.2.2.2 also Disable DHCP and reboot the device
[17/11, 5:01 pm] Sreejith Hikvision Technical Support Ekm: *Device Online Process :*

Kindly follow the  process.

1) configuration>>network>>tcp/ip>>disable DHCP
2) Also insert ipv4 default gateway(router ip address), ipv4 address(dvr/nvr ip address).
3) enter preferred DNS as *8.8.8.8* alternate DNS as *4.2.2.2*
4) go in Configuration>>network>>nat>>disable UPnP.
5) after that go in configuration>>network>>platform access>>enable ezviz/hik-connnect option and enter verification code there.
6) *check the server address.*
It should be *dev.ind.hik-connect.com* or *litedev.ind.hik-connect.com*
7) go in menu>>configuration>>network>>platform access >> status whether it is showing online or offline.

Hikvision dvr internet connection setting

Put prefered dns 8.8.8.8 &alternate DNS 4.2.2.2 also Disable DHCP and reboot the device

*Device Online Process :*

Kindly follow the  process.

1) configuration>>network>>tcp/ip>>disable DHCP

2) Also insert ipv4 default gateway(router ip address), ipv4 address(dvr/nvr ip address).

3) enter preferred DNS as *8.8.8.8* alternate DNS as *4.2.2.2*

4) go in Configuration>>network>>nat>>disable UPnP.

5) after that go in configuration>>network>>platform access>>enable ezviz/hik-connnect option and enter verification code there.

6) *check the server address.*

It should be *dev.ind.hik-connect.com* or *litedev.ind.hik-connect.com*

7) go in menu>>configuration>>network>>platform access >> status whether it is showing online or offline.

Backup system files and folders using Script files

Backup system files and folders using Script files

"C:\Program Files\WinRAR\Rar.exe" a -r -m3 -ag[yyyy-mm-dd] "C:\Destination Folder\Backup .rar" "C:\Source Folder"

Eg:

"C:\Program Files\WinRAR\Rar.exe" a -r -m3 -ag[dd-mm-yyyy] "C:\Users\admin\Desktop\TallyBackup_%mydate%.rar" "tally"

set mydate=%date:~-4%-%date:~3,2%-%date:~0,2%

"C:\Program Files\WinRAR\Rar.exe" a -r -m5 "C:\Users\Samya Daleh\Desktop\backup_%mydate%.rar" "C:\Users\Samya Daleh\Documents"

"C:\Program Files\WinRAR\Rar.exe" a -r -m3 -ag[yyyy-mm-dd] "C:\Destination Folder\Backup .rar" "C:\Source Folder"

Malyalam Fonts In Ubuntu

Download ISM Malyalam Fonts

ഉബുണ്ടുവിൽ എങ്ങനെ മലയാളം ഫോണ്ടുകൾ ഇൻസ്റ്റാൾ ചെയ്യാം എന്നു നോക്കാം 

ആദ്യമായി ഐ എസ് എം (ISM)മലയാളം ഫോണ്ടുകൾ ഡൗൺലോഡ് ചെയ്ത് എടുക്കണം 

മുകളിൽ കൊടുത്തിരിക്കുന്ന Download buttun -ണിൽ ക്ലിക്ക് ചെയ്താൽ ഫോണ്ടുകൾ ഡൗൺലോഡ് ചെയ്യാൻ സാധിക്കുന്നതാണ് . 

ഡൗൺലോഡ് ചെയ്ത   ഫോണ്ടുകൾ extract ചെയ്തെടുക്കണം. 

ഉബുണ്ടുവിലെ മലയാളം ഫോണ്ടുകൾ സേവ് ചെയ്തിരിക്കുന്ന ഫോൾഡർ ഓപ്പൺ ചെയ്യുക 

Applications>Accesories>Terminal

Terminal വിൻഡോയിൽ  sudo nautilus

എന്ന് ടൈപ്പ് ചെയ്ത് enter ചെയ്യുക റൂട്ട് പാസ്സ്‌വേർഡ് ചോദിക്കുമ്പോൾ ടൈപ്പ് ചെയ്ത് കൊടുക്കുക ഇപ്പോൾ ഇടതുവശത്തായി Root,Desktop,File ,System,Network ,Trash എന്നീ ഫോൾഡർ കാണാം ഇടതുവശത്തുള്ള

File Systen>usr>share>fonts>>truetype>ttf-malayalam-fonts  എന്ന ക്രമത്തിൽ തുറക്കുക നേരത്തെ Extract ചെയ്ത് ISM ഫോൺസ് എന്ന ഫോൾഡറിൽ മലയാളം ഫോണ്ടുകൾ കോപ്പി ചെയ്ത് ഇപ്പോൾ തുറന്ന് ttf_malyalam_fonts എന്ന ഫോൾഡറിൽ പേസ്റ്റ് ചെയ്യുക എല്ലാ folders ഇനി ക്ലോസ് ചെയ്യുക 

Office activation 365

Activate Office 365 ProPlus for FREE

============================================

cd /d %ProgramFiles%\Microsoft Office\Office16

cd /d %ProgramFiles(x86)%\Microsoft Office\Office16

for /f %x in ('dir /b ..\root\Licenses16\proplusvl_kms*.xrm-ms') do cscript ospp.vbs /inslic:"..\root\Licenses16\%x"

cscript ospp.vbs /inpkey:XQNVK-8JYDB-WJ9W3-YJ8YR-WFG99

cscript ospp.vbs /unpkey:BTDRB >nul

cscript ospp.vbs /unpkey:KHGM9 >nul

cscript ospp.vbs /unpkey:CPQVG >nul

cscript ospp.vbs /sethst:s8.uk.to

cscript ospp.vbs /setprt:1688

cscript ospp.vbs /act

===========================================

@echo off

title Activate Office 365 ProPlus for FREE - MSGuides.com&cls&echo ============================================================================&echo #Project: Activating Microsoft software products for FREE without software&echo ============================================================================&echo.&echo #Supported products: Office 365 ProPlus (x86-x64)&echo.&echo.&(if exist "%ProgramFiles%\Microsoft Office\Office16\ospp.vbs" cd /d "%ProgramFiles%\Microsoft Office\Office16")&(if exist "%ProgramFiles(x86)%\Microsoft Office\Office16\ospp.vbs" cd /d "%ProgramFiles(x86)%\Microsoft Office\Office16")&(for /f %%x in ('dir /b ..\root\Licenses16\proplusvl_kms*.xrm-ms') do cscript ospp.vbs /inslic:"..\root\Licenses16\%%x" >nul)&(for /f %%x in ('dir /b ..\root\Licenses16\proplusvl_mak*.xrm-ms') do cscript ospp.vbs /inslic:"..\root\Licenses16\%%x" >nul)&echo.&echo ============================================================================&echo Activating your Office...&cscript //nologo ospp.vbs /unpkey:WFG99 >nul&cscript //nologo ospp.vbs /unpkey:DRTFM >nul&cscript //nologo ospp.vbs /unpkey:BTDRB >nul&cscript //nologo ospp.vbs /inpkey:XQNVK-8JYDB-WJ9W3-YJ8YR-WFG99 >nul&set i=1

:server

if %i%==1 set KMS_Sev=kms7.MSGuides.com

if %i%==2 set KMS_Sev=kms8.MSGuides.com

if %i%==3 set KMS_Sev=kms9.MSGuides.com

if %i%==4 goto notsupported

cscript //nologo ospp.vbs /sethst:%KMS_Sev% >nul&echo ============================================================================&echo.&echo.

cscript //nologo ospp.vbs /act | find /i "successful" && (echo.&echo ============================================================================&echo.&echo #My official blog: MSGuides.com&echo.&echo #How it works: bit.ly/kms-server&echo.&echo #Please feel free to contact me at msguides.com@gmail.com if you have any questions or concerns.&echo.&echo #Please consider supporting this project: donate.msguides.com&echo #Your support is helping me keep my servers running everyday!&echo.&echo ============================================================================&choice /n /c YN /m "Would you like to visit my blog [Y,N]?" & if errorlevel 2 exit) || (echo The connection to my KMS server failed! Trying to connect to another one... & echo Please wait... & echo. & echo. & set /a i+=1 & goto server)

explorer "http://MSGuides.com"&goto halt

:notsupported

echo.&echo ============================================================================&echo Sorry! Your version is not supported.&echo Please try installing the latest version here: bit.ly/odt2k16

:halt

pause >nul

Office 2010

@echo off

title Activate Microsoft Office 2010 Volume for FREE!&cls&echo ============================================================================&echo #Project: Activating Microsoft software products for FREE without software&echo ============================================================================&echo.&echo #Supported products:&echo – Microsoft Office 2010 Standard Volume&echo – Microsoft Office 2010 Professional Plus Volume&echo.&echo.&(if exist “%ProgramFiles%\Microsoft Office\Office14\ospp.vbs” cd /d “%ProgramFiles%\Microsoft Office\Office14”)&(if exist “%ProgramFiles(x86)%\Microsoft Office\Office14\ospp.vbs” cd /d “%ProgramFiles(x86)%\Microsoft Office\Office14”)&echo.&echo ============================================================================&echo Activating your Office…&cscript //nologo ospp.vbs /unpkey:8R6BM >nul&cscript //nologo ospp.vbs /unpkey:H3GVB >nul&cscript //nologo ospp.vbs /inpkey:V7QKV-4XVVR-XYV4D-F7DFM-8R6BM >nul&cscript //nologo ospp.vbs /inpkey:VYBBJ-TRJPB-QFQRF-QFT4D-H3GVB >nul&set i=1

:server

if %i%==1 set KMS_Sev=kms7.MSGuides.com

if %i%==2 set KMS_Sev=kms8.MSGuides.com

if %i%==3 set KMS_Sev=kms9.MSGuides.com

if %i%==4 goto notsupported

cscript //nologo ospp.vbs /sethst:%KMS_Sev% >nul&echo ============================================================================&echo.&echo.

cscript //nologo ospp.vbs /act | find /i “successful” && (echo.&echo ============================================================================&echo.&echo #My official blog: MSGuides.com&echo.&echo #How it works: bit.ly/kms-server&echo.&echo #Please feel free to contact me at msguides.com@gmail.com if you have any questions or concerns.&echo.&echo #Please consider supporting this project: donate.msguides.com&echo #Your support is helping me keep my servers running everyday!&echo.&echo ============================================================================&choice /n /c YN /m “Would you like to visit my blog [Y,N]?” & if errorlevel 2 exit) || (echo The connection to my KMS server failed! Trying to connect to another one… & echo Please wait… & echo. & echo. & set /a i+=1 & goto server)

explorer “http://MSGuides.com”&goto halt

:notsupported

echo.&echo ============================================================================&echo Sorry! Your version is not supported.

:halt

pause >nul

Office 2016

1.      Find the Office location in your Windows and move to there.

If you install your Office in the ProgramFiles folder, the path will be “%ProgramFiles%\Microsoft Office\Office16” or “%ProgramFiles(x86)%\Microsoft Office\Office16”. It depends on the architecture of the Windows OS you are using. If you are not sure of this 

issue, don’t worry, just run both of the commands above. One of them will be not executed and an error message will be printed on the screen.

cd /d %ProgramFiles%\Microsoft Office\Office16
cd /d %ProgramFiles(x86)%\Microsoft Office\Office16




1.      Convert your Office to volume version if you are using retail one.

If your Office is got from Microsoft, this step is required. On the contrary, if you install Office from a Volume ISO file, this is optional so just skip it if you want.


for /f %x in ('dir /b ..\root\Licenses16\proplusvl_kms*.xrm-ms') do cscript ospp.vbs /inslic:"..\root\Licenses16\%x"






Make sure your PC is connected to the internet, then run the following command.


cscript ospp.vbs /inpkey:XQNVK-8JYDB-WJ9W3-YJ8YR-WFG99
cscript ospp.vbs /unpkey:BTDRB >nul
cscript ospp.vbs /unpkey:KHGM9 >nul
cscript ospp.vbs /unpkey:CPQVG >nul
cscript ospp.vbs /sethst:s8.uk.to
cscript ospp.vbs /setprt:1688
cscript ospp.vbs /act


How to fix error code 0x0000011b

 

How to fix error code 0x0000011b that appears when printing after installing the September cumulative update KB5005565 in Windows 10. Recently, several users have reported getting error code 0x0000011b after they received the 14 September cumulative update. You might not get printed paper in return for your document when trying to print after installing KB5005565 on Windows 10 21H1, 20H2, or 2004. Commonly, the error message is “Windows cannot connect to printer” Here is easy method to fix this printer error.

Registry editor path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Print\ New key name: RpcAuthnLevelPrivacyEnabled

Edit value to 0

Printer error fix from microsoft

Microsoft

KB5005652—Manage new Point and Print default driver installation behavior (CVE-2021-34481)

Summary

Windows updates released August 10, 2021 and later will, by default, require administrative privilege to install drivers. We made this change in default behavior to address the risk in all Windows devices, including devices that do not use Point and Print or print functionality. For more information, see Point and Print Default Behavior Change and CVE-2021-34481.  

By default, non-administrator users will no longer be able to do the following using Point and Print without an elevation of privilege to administrator:

• Install new printers using drivers on a remote computer or server

• Update existing printer drivers using drivers from remote computer or server

Note If you are not using Point and Print, you should not be affected by this change and will be protected by default after installing updates released August 10, 2021 or later.

Important Printing clients in your environment must have an update released January 12, 2021 or later before installing updates release September 14, 2021.  Please see Q2 in “Frequently asked questions” below for more information.

Modify the default driver installation behavior using a registry key

You can modify this default behavior using the registry key in the table below. However, be very careful when using a value of zero (0) because doing that makes devices vulnerable. If you must use the registry value of 0 in your environment, we recommend using it temporarily while you adjust your environment to allow Windows devices to use the value of one (1).   

Registry location	HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\Printers\PointAndPrint
DWord name	RestrictDriverInstallationToAdministrators
Value data	Default behavior: Setting this value to 1 or if the key is not defined or not present, will require administrator privilege to install any printer driver when using Point and Print. This registry key will override all Point and Print Restrictions Group Policy settings and ensures that only administrators can install printer drivers from a print server using Point and Print. Setting the value to 0 allows non-administrators to install signed and unsigned drivers to a print server but does not override the Point and Print Group Policy settings. Consequently, the Point and Print Restrictions Group Policy settings can override this registry key setting to prevent non-administrators from installing signed and unsigned print drivers from a print server. Some administrators might set the value to 0 to allow non-admins to install and update drivers after adding additional restrictions, including adding a policy setting that constrains where drivers can be installed from. Important There is no combination of mitigations that is equivalent to setting RestrictDriverInstallationToAdministrators to 1. Note Updates released July 6, 2021 or later have a default of 0 (disabled) until the installation of updates released August 10, 2021 or later.  Updates released August 10, 2021 or later have a default of 1 (enabled).
Restart requirements	No restart is required when creating or modifying this registry value.

Note Windows updates will not set or change the registry key. You can set the registry key before or after installing updates released August 10, 2021 or later.

Automate the addition of RestrictDriverInstallationToAdministrators registry value

To automate the addition of the RestrictDriverInstallationToAdministrators registry value, follow these steps:

1. Open a Command Prompt window (cmd.exe) with elevated permissions.

2. Type the following command and then press Enter:

   reg add "HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\Printers\PointAndPrint" /v RestrictDriverInstallationToAdministrators /t REG_DWORD /d 1 /f

Set RestrictDriverInstallationToAdministrators using Group Policy

After installing updates released October 12, 2021 or later, you can also set RestrictDriverInstallationToAdministrators using a Group Policy, using the following instructions:

1. Open the group policy editor tool and go to Computer Configuration > Administrative Templates > Printers. 

2. Set the Limits print driver installation to Administrators setting to "Enabled". This will set the registry value of RestrictDriverInstallationToAdministrators to 1.

Install print drivers when the new default setting is enforced

If you set RestrictDriverInstallationToAdministrators as not defined or to 1, depending on your environment, users must use one of the following methods to install printers:

• Provide an administrator username and password when prompted for credentials when attempting to install a printer driver.

• Include the necessary printer drivers in the OS image.

• Use Microsoft System Center, Microsoft Endpoint Configuration Manager, or an equivalent tool to remotely install printer drivers.

• Temporarily set RestrictDriverInstallationToAdministrators to 0 to install printer drivers.

Note If you cannot install printer drivers, even with administrator privilege, you must disable the Only use Package Point and Print Group Policy.

Recommended settings and partial mitigations for environments that cannot use the default behavior

The following mitigations can help secure all environments, but especially if you must set RestrictDriverInstallationToAdministrators to 0. These mitigations do not completely address the vulnerabilities in CVE-2021-34481.

Important There is no combination of mitigations that is equivalent to setting RestrictDriverInstallationToAdministrators to 1.

Verify that RpcAuthnLevelPrivacyEnabled is set to 1 or not defined

Verify that RpcAuthnLevelPrivacyEnabled is set to 1 or not defined as described in Managing deployment of Printer RPC binding changes for CVE-2021-1678 (KB4599464).

Verify that Security Prompts are enabled for Point and Print

Verify that Security Prompts are enabled for Point and Print as described in KB5005010: Restricting installation of new printer drivers after applying the July 6, 2021 updates. 

Permit users to only connect to specific print servers that you trust

This policy, Point and Print Restrictions, applies to Point and Print printers using a non-package-aware driver on the server. 

Use the following steps:

1. Open the Group Policy Management Console (GPMC).

2. In the GPMC console tree, go to the domain or organizational unit (OU) that stores the user accounts for which you want to modify printer driver security settings.

3. Right-click the appropriate domain or OU and click Create a GPO in this domain, and Link it here.Type a name for the new Group Policy Object (GPO) and then click OK.

4. Right-click the GPO that you created and then click Edit.

5. In the Group Policy Management Editor window, click Computer Configuration, click Policies, click Administrative Templates, and then click Printers.

6. Right-click Point and Print Restrictions, and then click Edit.

7. In the Point and Print Restrictions dialog, click Enabled.

8. Select the Users can only point and print to these servers checkbox if it is not already selected.

9. Enter the fully qualified server names. Separate each name by using a semicolon (;).

   Note After installing updates released September 21, 2021 or later, you can configure this group policy with a period or dot (.) delimited IP addresses interchangeably with fully qualified host names.

10. In the When installing drivers for a new connection box, select Show warning and Elevated Prompt.

11. In the When updating drivers for an existing connection box, select Show warning and Elevated Prompt.

12. Click OK.

Permit users to only connect to specific Package Point and Print servers that you trust

This policy, Package Point and Print - Approved servers, will restrict the client behavior to only allow Point and Print connections to defined servers that use package-aware drivers.

Use the following steps:

1. On the domain controller, select Start, select Administrative Tools, and then select Group Policy Management. Alternatively, select Start, select Run, type GPMC.MSC, and then press Enter.

2. Expand the forest and then expand the domains.

3. Under your domain, select the OU where you want to create this policy.

4. Right-click the OU and then select Create a GPO in this domain, and link it here.

5. Give the GPO a name, and then select OK.

6. Right-click the newly created Group Policy Object and then select Edit to open the Group Policy Management Editor.

7. In the Group Policy Management Editor, expand the following folders:

   1. Computer Configuration

   2. Policies

   3. Administrative Templates

   4. Local Computer Polices

   5. Printers

8. Enable Package Point and Print - Approved servers and select the Show... button.

9. Enter the fully qualified server names. Separate each name by using a semicolon (;).

   Note After installing updates released September 21, 2021 or later, you can configure this group policy with a period or dot (.) delimited IP addresses interchangeably with fully qualified host names.

Frequently asked questions

Q1: Every time I attempt to print, I receive a prompt saying, "Do you trust this printer," and it requires administrator credentials to continue.  Is this expected?

A1:Being prompted for every print job is not expected. The majority of environments or devices that experience this issue will be resolved by installing updates released October 12, 2021 or later.  These updates address an issue related to print servers and print clients not being in the same time zone. 

If you are still having this issue after installing updates released October 12, 2021 or later, you might need to contact your printer manufacturer for updated drivers.  This issue might also occur when a print driver on the print client and the print server use the same filename, but the server has a newer version of the driver file. When the print client connects to the print server, it finds a newer driver file and is prompted to update the drivers on the print client. However, the file in the package it is offered for installation does not include the newer driver file version. 

The files being compared are the drivers within the spool folder, usually in C:\Windows\System32\spool\drivers\x64\3 on both the print client and print server.  The driver package being offered for installation will usually be in C:\Windows\System32\spool\drivers\x64\PCC on the print server.  After the files in the \3 folder are compared between devices, if they do not match, the package in PCC is installed.  If the files in the print server’s \3 folder are not from the same printer driver that PCC offers to the client, the print client will compare the files and find the mismatch every time it prints. 

To mitigate this issue, verify that you are using the latest drivers for all your printing devices.  Where possible, use the same version of the print driver on the print client and print server. If updating drivers in your environment does not resolve the issue, please contact support for your printer manufacturer (OEM).

Q2: I installed updates released September 14, 2021 and some Windows devices cannot print to network printers.  Is there an order I need to install updates on print clients and print servers?

A2: Before installing updates released September 14, 2021 or later on print servers, print clients must have installed updates released January 12, 2021 or later. Windows devices will not print if they have not installed an update released January 12, 2021 or later. 

Note You do not need to install earlier updates and can install any update after January 12, 2021 on printing clients.  We recommend that you install the latest cumulative update on both clients and servers.

Resources

• Point and Print Default Behavior Change

• Introduction to Point and Print

• Add and Remove Drivers to an offline Windows Image

• Manage drivers - Configuration Manager | Microsoft Docs

• Point and Print with Driver Packages – Windows drivers | Microsoft Docs

https://support.microsoft.com/en-us/topic/kb5005652-manage-new-point-and-print-default-driver-installation-behavior-cve-2021-34481-873642bf-2634-49c5-a23b-6d8e9a302872